Questions & Answers for: adjust valves 125 Cars & Trucks

I need to know where the idle adjustment screw is on a 92 Saturn SL1 and what wrench to use. its located on the throttle body connected to your air intake manifold where your throttle cable connects ...

...It is running a little better, but still shakes a little when sitting still. the valve train adjustment is off! what you are experiencing is a leaking valve issue check the compression it ...

...125 on monday. Any thoughts. unplug cruise contoll cabel at trottle body some times these get jamed not letting trottle return remove cable to see if this is your prob. REPLACED IDLE AIR YOU HAVE TO ...

How mush will A valve adjustment coast me? roughly it would be be 2-6 hrs at 85-125$ hr depending on what kind of vehicle

...valves 4-6-7-8 can be adjusted- but double check to make sure none of the followers are on the ramps of the lobes.  as my translation may not be completely accurate.  The torque for the ...

...125 2007 consume too much engine oil, when i bought it, first time i changed it after 700 miles, when i try to take out old oil nothing comes out, then i did it on 550 miles nothing comes then i did ...

...valves and valve job with new guides. Rebuilt governor and fan shaft. Checked timing on crank to cam gear. Resurfaced head and block. (.050) total. Tried different carb and dist. from a tractor that ...

...pan bolts to 13.6 N·m (125 in. lbs.) torque. Lower vehicle and fill transmission with Mopar® ATF +4, Automatic Transmission fluid. Check and adjust gearshift and throttle valve cables, if

125 bs4 het has driven 55000kms and i have changed kit-piston along with valve and valve seal, timing chain....And my mechanic adjusted the tappet without feeler gauge...I want to know whats the exact

...Rotate crank (under that left side cover) counterclockwise until the T lines up with a ... Valve Adjustment and the famous "T" mark - XR/CRF80-200 Apr 24, 2006 1985 Honda XL350R TDC Valve ...