...bolts on the alternator that accomplish this, two lock the alternator down and the bolt on the top adjusts the fan belt tension. Removing the alternator belt allowed the upper right bolt to slide
...on the inside its toe in. If it's on the outside its toe out. I think you can adjust the toe in & out. look under it. and e-mail me. if you need more info. hope this is helpful to you. ...
................................................... -0° 30' ± 45' The camber angle can be adjusted up to ±25' (center of tolerance) by replacing one damper pinch bolt with the adjusting
...have an alignment done and they told me that the front camber is way out of tolerance and can't be adjusted. I know the problem is with the control arms in the front, but how can I tell if they're ...
...Adjust rear toe-in by sliding rear control arm until rear toe-in is correct. Install NEW lock nut, and tighten it while holding adjusting bolt. Wheel Alignment Specifications Camber - Measurement in ...
toe 0.19; thrust angle 0.02 If the car is stock then I would run the caster at .05 higher on the right than the left to adjust for the crown of the road. the front alignment looks good other than I am
Usually answered in minutes!
2,998 Questions
2,681 Questions
1,631 Questions
1,636 Questions
1,570 Questions
