Questions & Answers for: adjust rocker arms

adjust rocker shaft on discovery td5 how do you adjust the injector rocker shaft on a land rover discovery td5 There are adjustment screws on the rockets according to RAVE. The procedure is as follows

Ad

rocker arms of a 1997 jeep grand cherokee straight six be adjusted Remove the valve covers. Inspect each rocker arm for wear, cracks or other damage, check the rocker arm abd dykcrum for wear, replace

Ad

Question about 1997 Grand Cherokee

1 Answer

...shaft assemblies. Tighten the rocker arm shaft retainer bolts to 23 ft. lbs. (32 Nm). * Check valve adjustment and install the valve cover. Tighten the valve cover bolts to 16 inch lbs. (1.8 Nm) for ...

Question about 1997 Grand Cherokee

1 Answer

adjust the valves on a 1998 old bravada 4.3 vortec You don't. They are non-adjustable hydraulic lifters. GM's spec for torque on the rocker arm nuts: Tighten the valve rocker arm ball studs to

Question about 1997 Grand Cherokee

1 Answer

1998 s10 2.2 rocker arm torque specs When searching for rocker arm adjustment on 1998 s10 and you come across search result in googles main searches titled " rocker arm adjustment on 1998 chevy s10 ...

Question about 1999 Century

1 Answer

...adjustable you can adjust that rocker arm by tighten it up a little at a time until tapping stops but,if the rocker arms are not adjustable or have a net lash then you will need to replace the

...get no compression in the motor or you will get excessive knocking from the lifters adjusting the rocker arms properly will stop this . follow this link this will show you how to adjust rocker

...rocker arm slowly until it stops tapping, then adjust it. Do not over-tighten! This can damage the engine. Listen carefully to how the engine sounds; if it starts to stumble when you tighten a loose ...

...rocker arms need to be adjusted, they are not set to a specific torque, they use self locking "crimp" nuts to hold the adjustment, these nuts should not be used over to hold the adjustment replace ...

...rocker arms need lash adjustment? Question edited for clarity. Question moved to model category. Torque for Rocker Arm Nuts: I Have a 1989 Chevy Cavalier ... 2CarPros https://www.2carpros.com > ... > ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...