Questions & Answers for: Kodak EasyShare how i adjust printer

...black ink cartridge and it will not print black but a light grey. Everytime you install a new cartridge, you should print a test page which will allow the printer to auto adjust to the target

...adjust the brightness and quality with no noticeable change to the problem. The printer prints a full page correctly. If I scan and print a document it prints ok (but somewhat lighter than the ...

printer will not print true color pictures come out with a green color Go into the printer's maintenance program and adjust the default hue and color saturation levels.

adjust it on the printer directly. If there is a bar for adjusting the ink, it should be right in the middle. Likely it is set at the lightest settings. If it is set at the middle, then move it to the

...IS SO LIGHT IT IS ALMOST IMPOSSIBLE TO READ Go to printer setup and adjust dots-per-inch setting for more dots. Keep going up until print density is good. If no help, try changing the black

...printer uses too much ink. The pictures come out over colored, especially black they also stay wet and smeary In Windows go to control panel ---> printers. Right click it and select properties. ...

...print but clears when OK button pressed. Can I adjust something to stop this happening? thank you Doug McCallum Upgrade the Firmware of your printer at this link: www.kodak.com/go/5500downloads ...

...adjust the knobs of printer tray to accomodate the paper, if present. Usually printer will have the seperate markings on the tray to indicate where to load envelopes and labels. I hope this is useful ...

...to adjust this from the screen on your printer. It should be under the options / settings button. You'll want to adjust it to be darker or high quality, depending on what settings your printer

only half the picture is printing? The printer may be runnung out of ink or requires alligment adjustments to fit into the printing paper. select portrait or landscape printign formats to fit pictures