...adjust idle Bike was running fine the other week. Took it out yesterday and it would quit when I came to a complete stop. I need to adjust the idle speed. I cannot find the idle adjustment. Please ...
adjust the idel. im not familiar with your specific model. but once you determine where the idle screw(s) are, turn them in clockwise with the engine running. go about 1/4 turn at a time until it will
...adjust the idle wait a few minutes and it does it all over again. Sounds like the idle circuits of the carbs are restricted, or there is an air leak at the intake manifolds. If the bike has sat for a ...
Question about 2007 V Star 1100 Classic
...adjust the idle bolt accordingly for 950-1050 rpm if necessary, adjust the A/F mixture bolt 1/4 turn at a time and let the engine settle for about 10 seconds, clockwise for a leaner mixture and ...
Question about 2006 V Star 1100 Classic
...without shifting into neutral Hi, Ron and the usual suspects are: 1. Throttle cables improperly adjusted or pinched. 2. Idle adjusting screw needs to be backed off. 3. Intake system air leak. 4. ...
...adjust the idle bolt accordingly for 950-1050 rpm if necessary, adjust the A/F mixture bolt 1/4 turn at a time and let the engine settle for about 10 seconds, clockwise for a leaner mixture and ...
...not idle down during shifting. Hi, Steve and the usual suspects are: 1. Throttle cables improperly adjusted or pinched. 2. Idle adjusting screw needs to be backed off. 3. Intake system air leak. 4. ...
...idle rpm idles high in gear Hi, Anonymous and the usual suspects are: 1. Throttle cables improperly adjusted or pinched. 2. Idle adjusting screw needs to be backed off. 3. Intake system air leak. 4. ...
...2006 v star engine will not idle Hi, Anonymous and the usual suspects are: 1. Idle speed improperly adjusted. 2. Air fuel mixture screws not properly adjusted. 3. Inlet system air leak. 4. Leaking ...
Question about 2003 V Star 1100 Classic
...few seconds then idles normal Hi, Ronald and the usual suspects are: 1. Throttle cables improperly adjusted, pinched or need lubrication. 2. Idle adjusting screw needs to be backed off. 4. Air fuel ...
Usually answered in minutes!
469 Questions
188 Questions
192 Questions
110 Questions
106 Questions