Questions & Answers for: adjust car door latch

Question about 1989 Cutlass Supreme

2 Answers

back to the handle. Try your door now. You may need to adjust it more. On my car this worked for a while, then the latch started to drag on the striker again so I bent the rod to get a bit more stroke

Ad

Question about 1989 Cutlass Supreme

1 Answer

...adjustment level. in order for someone to help you tell us what you are driving car, truck what make model 2 door or 4 etc. we would be guessing as make the adjustment on the bottom hinge on the ...

Ad

Question about 2004 VUE

1 Answer

...adjust the door, it seems to drop about 1/2 an inch when you open it. Any suggestions? Remember that there is a little play in the hinges, even new ones, enough that just a slight degree of play at ...

...the door jamb) Loosen it with a T-47 torx bit and tap it up or down until it line up with the latch. adjust it in and out until the door latches reliably and is lined up with the body when

...wear on the top of the strike pin Ford doors are pretty easy to adjust in this vintage Try adjusting the latch first if you can't get the door to shut correctly then you may have to adjust the ...

Question about 1999 Venture

1 Answer

adjust dr side door 2002 chevy venture driver dooor out of adjust If you can grab the end of the door and lift on,and there's movement, what you need is the door hings bushing, most all auto parts ...

...door latch to work in unlock and disengage when locked? I just replaced the latch handle in 2001 Sequoia. I didn't have to unhook any wiring. On testing the new latch I found that in unlock the latch ...

...open when it's closed. adjust the latch so that the door closes better. You may have to use a lever and brute force to bend the latch and panel back into position if the adjustment is not

...car driver side door and it automatically says on the dash board that my door is open?? Any suggestions on what might be wrong. Its a 2011 Ford edge if that helps at all. thanks Your door ajar system ...

...door hinges need adjusting. This is not uncommon for the year, make and model of your Jeep!! Check latch to make sure the plastic cover over the lever for the s adjust latch or hinges Oil the latch ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...