Question about Memory Craft 9500 Computerized Sewing Machine
...bobbin case. Remove the needle plate, to gain access to the case. Lift it out, noting how it is positioned! On the side of it , there are two screws, one is the adjustment screw - its the one that ...
tension cleaned machine. Any help would be great. Thanks Phil [email protected] I had this problem when I mixed my singer bobbins with my Janome bobbins. Are you using flat bobbins or rounded ones? If
bobbin tension bobbin thread showing through especially when I embroider. this is since I had new bobbin case put in. Does it need adjusting on the actual bobbin case? have adjusted on machine but ...
Question about Sewist 525S Mechanical Sewing Machine
adjust the bobbin tension. I amusing quality elastic thread from John Lewis, the correct top tension, fully cleaned machine, etc etc. PLEASE ONLY answer if you are familiar with this particular sewing
How do I adjust bobbin tension? Normally the bobbin is not the part that is tensioned. there is a tension device on the top of your machine for tensioning the needle thread.
do I adjust bobbin tension? As far as I know the bobbin is not tensiopned, The needle thread is tensioned, and that is done by routing the thread through the tension device on the top of most machines
adjust the bobbin tension ONLY if they are using very lightweight or very heavyweight thread in the bobbin. Most sewists will advise to make all possible adjustments to the top tension before tackling
Question about Memory Craft 3000
bobbin tension to keep the bobbin thread down (for this reason, I have a separate bobbin case that has the tension adjusted that is used only for FMQ). You may even need to decrease the top tension if
Question about Memory Craft 3000
...has been tightened specifically for quilting. For other sewing projects using a standard thread weight, I use a bobbin case that is factory set and then adjust the top thread tension for each
Question about Memory Craft 3000
...Bobbin tension and the Upper tension to put the loop between the 2 layers of fabric. You set the Bobbin tension first and the the top tension depends on the fabric and the thread used. Your Bobbin ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions