Questions & Answers for: adjust bike kick stand

...after few hours, the engine takes time to get hot. That's why the bike won't start right on the first kick. However, you can try with the back-to-back kicks as well. Maybe then your bike gets

...adjust this somewhere my bike is an aprilia 1000cc I'm not femiliar with your bike. But a bike is a bike when it comes to some problems, and yours is not disengaging the clutch. So, if its hydrolic ...

...kick stand is down The bike is supposed to shut down if the kick stand is down. It is a safety feature designed to prevent starting out with the stand down, which can be very inconvenient on your ...

...adjust a kick stand that keeps falling down? The stand is welded into the frame, not a bolt on stand. The model is the Falcon. you can't but check with these guys here ...

...bike feel higher but it reduced the "side stand drag" significantly. you can adjust the shock by removing the right hand panel and tool tray, lifting the rear wheel off the ground using a jack then ...

bike thinks the kick stand is still down. It may have been loosened out of adjustment by vibration. If the kick stand switch is out of whack, it will restart as long as the clutch in pulled in. But as

...yamaha virago 500 i think you have to adjust the clutch cable play to specs of the bike or your clutch plates needs replacement. Kick stand switch broken or kick stand down my bike is the same

...bike worked on and it was good before they worked on it. They claim they didn't touch anything. Also, is there a way to adjust the stand? There is a large spring that holds the stand either out or up ...

...bike is equipped with a kick stand kill switch it will kill the bike when put into gear if it is still down, sometimes the sensor or wires can go bad and make it think the kick stand is still down ...

...Adjust your clutch. I don't know what kind of bike you have. Research clutch adjustment for your bike online...usually this is a very simple procedure. Sounds like the "kick-stand-down" switch is ...