Questions & Answers for: Konica Minolta Magicolor adf sensor

My Magicolor 2300dl printer displays a 'Waste toner box full' message, even though I have just emptied the waste toner box. . Remove Waste Box, Empty box, wipe down w/ dry paper towel . Turn machine ...

Fatal Error 21H Konica Minolta 2300DL displays 'Fatal Error 21H' any ideas? FATAL ERROR CODE 21H / SERVICE CALL 21 TRANS DET SENS: Malfunction of the OHP detecting sensor check the OHP detecting ...

Question about my "Paper Jam at Transfer Roller" issue Hi Nopoke: Thank you SO MUCH for your feedback and advice. I did call Konica, and they only told me about the one sensor in the middle of the ...

fatal error 21h; and problem printing even without the error Problem one: konica minolta 2430 dl fatal error 21h. I think this happened before, and someone said to dust off the glass on a sensor, but ...

Fatal Error code 17H is all it states.. will not print what does it mean and how do I fix it. Thank you It is a rack rotation failure. • The Rack Positioning Sensor is in the blocked state when the ...

"Paper jam at fusing unit section" but I have removed all the paper that was there. did you try to check the sensors and actuators? maybe the actuator sensor didn't return

I have a Konica Minolta Magicolor 3730dn that gives me a fatal error code 0F52H Fatal error after power up Printwer goes in calibration mode at power up and after a minute or so goes into error mode ...

0F54H Fatal Error Witam, An error occurs on the toner level sensor for each color: 0F52H Toner level sensor /Y malfunction 0F53H Toner level sensor /M malfunction 0F54H Toner level sensor /C ...

...is actually A0HFPP4403 or A0HFPP4400. pretty pricey for what it is. $55 here KM MC1680MF Hinge ADF ...

...that is not reading the paper passage (or it the sensor is faulty all together) The amount of staples, paper clips, Bluetag and other junk I pulled from ADF over the years..Bucket loads :) Good