Questions & Answers for: Konica Minolta bizhub adf sensor

...ADF will not recognize paper in the feed tray. I have a Konica Minolta Bizhub Di1610, the upper Auto Document Feeder will not recognize when paper is set for copy or faxing. I have checked the paper ...

...verify misfeed paper beetween coverplaten and feedbelt(Yellow).Is necessary disassembly the ADF.Good luck.You will find a little

...sensor switch were you put the paper in detects the paper is there if the switch is working the adf board is fualty or the cable between the machine and adf broke from all the open and closeing after ...

...adf is telling the copier that your copying 8.5x5.5 that's when the copier blanks out the rest of your page. So do u have any scrap of paper or sensor that is blocked they have spring loaded flags on ...

...sensor (PS15) • Flatbed motor (M4) Remedy 1 Turn OFF/ON the main power switch. 2 Check CTLB for proper connection and correct as necessary. 3 Check PS15 and M4 for proper connection and correct as ...

...as moving the exposure lamp to the right will fix it. If you have a broken ADF connector on the back that pulls off the sensor connector. The previous answer and this one just about covers

...IT ASK TO TURN OFF THEN ON . IF I DO SO IT WORKS NORMALLY whats the error code mean? Relates to the ADF doc tray lift assay. Solved by cleaning the sensors within, and manually rotating the lifting ...