ADF Document Jammed Kept on getting Document Jammed error (ADF). Already dismantled the ADF to look if there still paper in it. Tried to find the tiniest paper that might cause the problem but found ...
...TRYING TO FAX THE PAPER, I AM GETTING THE MASSAGE "CHECK ORIGINAL" AND I ALSO FIND LEFT SIDE HINGES ARE BROKEN you have the problem with your adf on machine try to see where is sensor jammed or ...
...can use the machine, by the cover there is a sensor button, tape it down and you can still use the ...
Question about MFC 8820D All-In-One Laser Printer
brother 8820d MFC auto doc feeder does not work... After a piece of paper got jammed in the ADF,,,,,it now does not pull the orginal FAX or copy through the feeder at all.....no error message. I used ...
Question about MFC 420CN All-In-One InkJet Printer
...you try to scan through the adf part a message is displayed on the screen. Something like "Document loaded". Otherwise it's scanning the glass part. Maybe the sensor in adf part is bad, not ...
Sensor on the ADF. If it is stuck, a Document Jam Error will occur because the scanner will attempt to feed documents when there are none. The sensor I'm speaking of is a black plastic lever that sits
Question about MFC-8860DN All-In-One Laser Printer
...sensor under the lid does not activate properly resulting in the adf stopping and resulting in the machine registering a jam. the difference between the sensor activating or not can be as little as a ...
...ADF, rub clean the rollers with a damp cloth. Make sure there is no paper stuck in the area Also, check that the sensor flags are activating. just move them back and they should bounce back to normal ...
Question about MFC 8820D All-In-One Laser Printer
...need to be replaced? Here is the parts manual http://www.scribd.com/doc/86336820/Brother-MFC-8420-8820D-8820DN. Thank you!! Try to see if the sensor is stuck .. ADF jams and I have to hand-feed the ...
Question about MFC 8820D All-In-One Laser Printer
Adf continuously turns when machine is warming up MFC-8860 DN Check for any small piece of paper, or metal clip inside where the sensor is. Check also if any of the 2 Hinges is broken because on the ...
Usually answered in minutes!
1,135 Questions
1,012 Questions
743 Questions
623 Questions
406 Questions