Questions & Answers for: Muratec adf sensor

...back out ) this plunger operates a sensor inside the ADF when you close the ADF/LID to tell the machine it is closed. Check that the plunger is working...if it is then the sensor inside may be

muretec mfx 1430 streaking through the adf and its not the **** glass. Off the glass looks fine have swamped out the whole feeder twice same problem. Hello sir; Let's try two things , 1st, make a copy

...is located immediately beside entering the paper or on paper if you use presenting with pallet The ADF rollers for the Mfx-1430 comes an assembly. Part #DA7A003040. Contact a local copier dealer who ...

The MFX2830 adf pulls the paper crooked when feeding. check ADF rollers and re-feed pads.(maint cycle approx.50~80K) Also check ADF is square on copier..sometimes people push on ADF when moving ...

...with a line on the left hand side of the pg all the way from top to bottom Open the lid of the ADF and check the **** of glass that runs from back to front on top of the machine, most likely ...

...Setting, * ,0, 9. Select "Background Level"...Put a piece of 11" x 81/2" paper in the ADF...Select "Both"then Press Start. After resetting the background level then mahine will return

...LED print head has got nothing to do with fax's being sent. Clean the glass strip underneath the

...page which reaches the other end is divided into two. that is..the page is scanned as two. why..?? how can i solve this problem..?? PLEASE HELP...!! It's the sensor flags in the ADF(document

Our Muratec MFX1430, ADF will not feed mulitple copies at times and when it does only the first couple pages are printed in full with the other pages only printed on half of the paper. Also, the left ...

document feeder reporting paper jam when there is nojam The ADF need to be serviced the sensors are detecting the jam which you can not see. 1. maybe there is a very tine piece of paper inside ...