Questions & Answers for: Konica Minolta adf sensor

...ADF will not recognize paper in the feed tray. I have a Konica Minolta Bizhub Di1610, the upper Auto Document Feeder will not recognize when paper is set for copy or faxing. I have checked the paper ...

...sensor switch were you put the paper in detects the paper is there if the switch is working the adf board is fualty or the cable between the machine and adf broke from all the open and closeing after ...

f26-1 error code how do i reset this this is a toner density sensor error try replacing the toner density sensor

error 1050 sc67-11 the machine when turn on goes to this code which says sc67-11. can anyone help plz these are ADF sensors (dirt). they are some little mirrors on paper path. blow or brush them.

...adf is telling the copier that your copying 8.5x5.5 that's when the copier blanks out the rest of your page. So do u have any scrap of paper or sensor that is blocked they have spring loaded flags on ...

...sensor (PS15) • Flatbed motor (M4) Remedy 1 Turn OFF/ON the main power switch. 2 Check CTLB for proper connection and correct as necessary. 3 Check PS15 and M4 for proper connection and correct as ...

ADF original size sensor doesn't work so that I can't copy A3 format via ADF I replaced the sensor, I checked the connector, I replaced the scanner drive board. But the original size sensor doesn't ...

...sensor" which only lets the printer print out a few ... Konica Minolta paper jam adf scanner Questions & Answers ... www.fixya.com > Forum > Tags > paper jam adf scanner Question about bizhub 350 ...

...that is not reading the paper passage (or it the sensor is faulty all together) The amount of staples, paper clips, Bluetag and other junk I pulled from ADF over the years..Bucket loads :) Good

...IT ASK TO TURN OFF THEN ON . IF I DO SO IT WORKS NORMALLY whats the error code mean? Relates to the ADF doc tray lift assay. Solved by cleaning the sensors within, and manually rotating the lifting ...