Question about X632 All-In-One Laser Printer
...cover from ADF and then remove ADF Optical Assembly. Remove the screw from one end and slide out the two mirrors - clean these and the mirror which is fixed. Cheers Ross. ...
Question about X5150 All-In-One InkJet Printer
...ADF cover. Press down until the cover snaps into place.P ull out the main input tray. Slide the paper-width and paper-length guides to their outermost positions.Insert a stack of paper into the main ...
...ADF top cover. 2 Remove the jammed paper by gently pulling it straight out. 3 Close the ADF top cover, and then load the documents back into the ADF. Note: To prevent document jams, use the scanner ...
cover 5. On the control panel, press Fax. 6. Enter the fax number, then press black or color to send. Use the control panel and ADF 1. Load up to 50 sheets of your original document face up in the ADF
...cover and access the paper jam. Firmly grasp the paper, and then gently pull it out. Be careful not to tear the paper while removing it. If paper jam is in the Automatic Document Feeder (ADF), open ...
...the ADF cover and clean the rollers with a mixture of alcohol and soap. Damp a rag with the solution and wipe the rollers clean with it. That's make them more pliable and the paper jams will ...
Question about X7675 Aio Wl USB Adf 32/27PPM Ocr Dir Prt Pbridg Dplx All-In-One InkJet Printer
power belt is knocking Try to open the printer cover and access the cartridge area. Make sure the carrier belt is properly seated in its place. If not, please contact Lexmark Technical Support Center ...
Question about Pinnacle Pro901 All-in-one Inkjet Printer
...adf cover hinge won't close The left hinge on the scanner cover (ADF sits on top) will not seat properly, causing ADF to jam. Happy to buy new hinge(s), but can't find source. Or, fixing ...
Question about 90T8005 Prestige Pro805 Wireless All-in-One Printer w/Print
team via phone so they can send you a replacement printer. If not, just remove the hinge and its assembly so you will be able to totally close the cover of the printer and be able to scan from the ADF
Question about 90T8005 Prestige Pro805 Wireless All-in-One Printer w/Print
...that the ADF paper tray and extender are properly installed. Skews and jams at the ADF paper present sensor might be caused by an improperly closed ADF cover. Ensure the ADF cover is closed
Usually answered in minutes!
1,487 Questions
1,353 Questions
1,277 Questions
961 Questions
741 Questions