Question about bizhub 350 All-In-One Laser Printer
cover and shut the door. Your printer should now reboot - if the error comes back you will need to have the fuser either repaired or replaced. it gives the error code c3451 when i send a work to print
Question about bizhub 161f All-In-One Laser Printer
...ADF will not recognize paper in the feed tray. I have a Konica Minolta Bizhub Di1610, the upper Auto Document Feeder will not recognize when paper is set for copy or faxing. I have checked the paper ...
Question about bizhub 350 All-In-One Laser Printer
...cover of adf one is broken check and replace if necessary check on each end front rear on ADF paper path ther must be a paper clip , staples, a little teared paper jammed. and clean the **** glass or ...
Question about bizhub C351 All-In-One Laser Printer
...ADF/Platen cover and stand. The optical drive cable on the full speed unit had come off the pulley and was originally in a bind but we repaired this by placing it back on the pulley and all moves ...
Question about bizhub C351 All-In-One Laser Printer
...ADF/Platen cover and stand. It will make copies but it has a 6 1/8" x 8 5/8" BLACK area in the center of the 8 1/2" x 11" copy. It does the same on both color and black and white. Any help would be ...
Question about PagePro 1390MF All-In-One Laser Printer
adf cover"... I have a Konica-minolta pagepro 1390mf and am trying to send a fax. When I try to feed the paper at the top, it says "open adf cover, remove the paper" then I have to scan each page, one
...ADF it is clera and I dont see and black? Thanks.. try to cover it manually with a plain white board when your copying, not using the actual cover of the machine. if the black not appear, you have to ...
minolta di251 co500 Sir/Mam, First ensure that the right side of the machine is closed there are two latches on the side door inside are either one broken? if not ensure the door is closed. Take a ...
...sensor, as simple as moving the exposure lamp to the right will fix it. If you have a broken ADF connector on the back that pulls off the sensor connector. The previous answer and this one
Usually answered in minutes!
1,023 Questions
924 Questions
417 Questions
321 Questions
302 Questions