Questions & Answers for: acquiring signal

Question about nuvi 350 GPS Receiver

4 Answers

...acquiring satellite signal even when it's a clear sunny day. After 30 mintues, it was still searching! The unit appeared to have "stuck" in this acquiring mode. The following worked for me: 1) open ...

Ad

Question about nuvi 350 GPS Receiver

1 Answer

...acquiring satellites and just doesnt acquire any. I do not see the GPS getting any signal when i look at the signal bars. Would appreciate if you have any suggestion. Have you tried an external ...

Ad

Question about nuvi 350 GPS Receiver

1 Answer

...acquiring satellites. As the unit receives signal from the satellites, it will begin to lock on to them individually until it has acquired enough information to establish your position. If your unit ...

Question about Mio Moov 300 GPS Receiver

1 Answer

Mio Moov 300 can't get GPS signal Worked great for a week. Now everytime I turn it on, it will acquire signal correctly, work for about 30 seconds, and drop the signal. After that it will sit for ...

...acquiring signal" I recently replace the antenna for my satellite radion. The cable was broken. There was no longer any audio and the display shows "acquiring signal". The symptoms remain the same ...

Question about CP-150 WAAS GPS Receiver

1 Answer

...acquiring signal standard horizon 155c gps/chartplotter not acquiring signal connection seems good If the signal is good statement seems to imply that it is working, perhaps this is my ...

Question about nuvi 250 GPS Receiver

1 Answer

signal. It is also constantly refiguring the route. As GPS units are used, data is gathered which helps them acquire satellites quickly at the start of each use. If a device is used daily it should be

Question about MAP76 handheldS GPS Receiver

1 Answer

GPS wont aquire a satellite Hello there and happy new year If Your Unit Cannot Acquire Satellite Signals For your Garmin GPS unit to acquire the satellite signals it needs to function properly, the ...

Question about MAP76 handheldS GPS Receiver

1 Answer

...acquiring signal" and three bar... The display reads "acquiring signal" and three bars are displayed for signal strength but the receiver fails to connect and transmit to the car radio. ...

Question about StreetPilot C330 GPS Receiver

1 Answer

...acquiring satellite, then it means the signal strength is weak, try to get it outside where it can be facing the sky directly so it will be able to acquire satellite. Once you just update your gps ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top GPS Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66835 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...