Questions & Answers for: Suzuki accessories

no power coming from power accessory plus tried plugging in a satellite radio in front power accessory plug and there was no power. Then tried second row seat and rear plugs and got no power. Checked ...

need diagram for serpentine belt 2004 SUZUKI FORENZA - L4 2.0L 2000cc GAS FI N Adjustment The belt is automatically adjusted by the auto tensioner. Drive Belt Routings Fig. Accessory drive belt ...

...to use for gps unit There is an accessory plug in the headlight bucket that can be used to power accessories. The plug is white, and should be easy to spot. Just plug your accessory unto that plug ...

Wiring from "Windjammer Fairing to Bike is troublesome.... There are only nine wires to connect but have not been able to get the 'right and left hand turn signals' to work....Also the hi and low beam

where is the ac compressor located on a 2002 xl7 suzuki above or below the engine It depends on the engine size for the belt routing. Click on the "x" for the diagrams on the following engine sizes: ...

i have just fitted heated hand grips to my c50, they are to be direct conection to battery, i would prefer to run them through an accessory ,as to allow to on power up when ignition is on, there is a ...

how to change a crank position sensor on 2006 suzuki forenza What is the easiest way to do this? Removal 1) Disconnect the negative battery cable.2) Remove the power steering pump, if equipped. 3) ...

Why broke the belt many time what wrong which belt,? the accessory belt? I must guess. accessory belts fail for 3 reasons. 1: it is at end of life, say over 100k miles. 2: the last mech, used too much

...engine power. Since the turn signals failed check that circuit and all other accessory circuits or accessories that are attached directly to the

...1800cc auto engine weight weights? short block , long block, or long + intake and exhaust and all accessories? no transaxle. my 1.6L naked was 125lbs. i can walk and carry it. my guess is full ...