Questions & Answers for: how do i access lan

access point into my ethernet/wireless LAN. The LAN has a combo wireless/wired router. I set up the 810 in ad hoc mode, put it on a different channel as the router, added a wep code and it's own SSID.

...static ip 192.168.1.5 on the lan of the pc, then ping 192.168.1.245. if you can ping you should be able to access the configuration page. if the power is still blinking you can upgrade the ...

...lan card but it is not workin in vista you posted in Wireless Access Points. Either way, you can go to the Netgear web site and see if you have Vista drivers for your particular LAN card. try ...

...access point's LAN Ethernet ports, turn off its DHCP server, and give the wireless router a static IP on your LAN: Connect a PC directly to a LAN port on the wireless router with an Ethernet cable. ...

... Save the changes, Plug the access point wnr1000 to the lan port on the main router and the other end also on the lan port on the wnr1000.(LAN to LAN) It should be working now as an access point. ...

...access point's LAN Ethernet ports, turn off its DHCP server, and give the wireless router a static IP on your LAN: Connect a PC directly to a LAN port on the wireless router with an Ethernet cable. ...

...LAN? You can only access Administration if you reset the device through LAN (pressing reset button). You cannot access Admin config after reset through wireless... If your already using LAN, try ...

can access lan internet lan stands for local area network so if your connected to the internet your already accessing lan network.

...the server, somewhere there is a disconnection. Does it supply Power Over Ethernet? The radio only provides access to the server/router over the LAN. If it cannot log on to the LAN it will not

...access to lan settings it's not accessible and to the Left says Lan settings do not apply to dial up connecions. choose settings above for dial up settings right. you can't configure LAN that you ...