6 pin connectors, these wires operate your starter. the car will start and run but your alarm will no longer be active. the door locks and everthing else will still work. the only issue i am having is
6-pin and 10-pin to shut off the alarm system completely but the car won't start without it connected. my buddy had said that there is a thing called a "key sequence" that will reset the alarm but the
...go off? u have lost the alarm code when remove the battery .me think is go to electric shop or have a look the alarm book manual if u got it and look in there ,should tell u how to reset the alarm ...
...manual ,, and sometimes the alarm go on..(just ,went u open the door and i have to disconect the battery. it sounds like one of the sensors for your alarm is faulty. I'd recommend taking it to a ...
...Alarm box is behind the abs light panel and headlight switch, Its kind of hard to get to but there will be a 6 pin and a 10 pin, the other box is for the headlights, unplug the 10 pin harness and pit ...
Question about 1996 Passat
...was replaced and now it wont start. my enging is a 6 cylinder You should be able to use your key cylinder at your driver door to disarm the factory alarm by turning it to unlock 2 times with the ...
...6 wire connector and one has a 10 wire connector, unplug them both, then ur alarm will be off but it kills your starter, to keep the starter workin connect the 5 and 6 wire from the 6 wire connector ...
Question about 1996 Jetta
...boxes (modules) the alarm has two connectors, one has 6 wires and the other has 10, the 6 pin has a red wire and a red and black wire, jump those two together and you will bypass your alarm ...
...lights and the other is an alarm, we are looking for the one with a 10pin and 6 pin connector, the 6 pin will have a red wire and a black and red wire, jump those wires and leave the box ...
Question about 1996 Jetta
...6 wire connector and one has a 10 wire connector, unplug them both, then your alarm will be off but it kills your starter To keep the starter working, connect the 5 and 6 wire from the 6 wire ...
Usually answered in minutes!
1,967 Questions
1,322 Questions
1,226 Questions
1,072 Questions
1,150 Questions