Questions & Answers for: Mitsubishi Lancer ac belt

...this causes slippage, and squeal, esp when a load is on the belt like the AC. We technicians get no compensation for our time, if this info is helpful or fixes the issue please rate me, ...

belt. The ac works fine; therefore, not sure if the compressor is the culprit. I am sure the issue is belt related noise, it must be inspected not just for the belt but the idlers and pulleys the belt

My AC and Heater squeal when I turn the fan on, all belts checked out fine. There is no squeal when I have the knob in the off position, only when I turn it on, for both ac and heater. Most likely it ...

...AC belt idler pulley, or perhaps the compressor clutch. This is easily checked. The belt can be loosened, and the idler pulley checked for free rotation. At the same time, (engine off) the compressor ...

...lancer es 2.0 It's attached to the timing belt cover u have to remove ac and harmonic balance pulley and the motor mount and the alternator it's no small job so if ur not a mechanic .... GET

...working in my 2009 lancer when the ac was on it was making a weird noise and then it just stopped working. The fuses are all good. Check your belt, Maybe it ran out of freon(sorry about

belt keeps fraying. had someone look at it and they said it could be the ac pulley is out of alignment. suggested ac pump or clutch? said it was about a $1000 fix. hoping to avoid that. You must check

...AC, Power steering, Serpentine belt You can draw one before you remove any belts You can print many many pictures of what you need already on the internet This is the routing for the 1.8L, 2.0L and ...

Why does it overheat with the A/C fan on? Added coolant, turned fan down to 1 or turned AC off completely Crank up and turn on ac and watch belts turn and see if compressor is locking up/ Are the ...

...belt squeal so much on initial ... 25 posts May 14, 2010 More results from www.dsmtuners.com Lancer Troubleshooting [Archive] - evolutionm.net ...