Questions & Answers for: Dodge Dakota ac belt

...AC/alternator mount bracket. If you don't have the special hose clamp plyers they are worth buying. (those clamps are difficult with regular plyers) The fan clutch has a special wrench which is ...

...belt for a 1999 Dakota 3.9 w/o AC? The compressor is noisy(bearing?) and the system already had a leak. the one without ac has an ac delete pulley that sits where the ac pump would go, so the answer ...

02 dakota 3.9 belt diagram 02 dakota 3.9 ac doesnt work just wanted to put a smaller belt on it to eliminate ac Below is the diagram for your truck w/o AC.

belt and check for free play and smooth turning on alternator. Clean and tighten battery connectors. Check DC voltage at idle,it should be between 13.8V to 14.2V. ==== For the last test,you may need a

...This is the pulley that allows you to disconnect the AC compressor. It takes the place of the compressor and allows you to use the original serpentine belt. Or you may be talking about the AC ...

need a diagram for 1991 dakota 5.2 l w/ ac serpintine belt It took me almost an hour to find but this should be it. Hope this helps... Please dont forget to rate. Thanks... Dale hope this helps!

AC belt won't work. I used a 5070900 / 7PK2285 for mine and it worked fine. Just a touch tight getting on. Next time I'll probably go 1/2 inch longer so a 5070905. I'm a licensed tech with 20 years in

...ac compressor not engaging anymore pulley is running freely from the belt. What can be the cause of this failure? I tried to rotate the central rotor by my hand and its rotating its not stuck. What ...

...AC bypass belt squealing. New belt, replaced tensioner, all pulleys spin nice and free, belt is somewhat loose and still squealing. Ideas? Is there a way to adjust the alternator or something on this ...

...if u cant afford the part it allows ur belt to be ran right still until u are abile to fix properly ask for ac replacement bracket with. Pulley on itit should just be a bracket with only a pulley on ...