Questions & Answers for: Chevrolet Cobalt abs light stays on

Question about 2006 Cobalt

1 Answer

dash lights on There are two lights that are on on my dash. One is ABS and the other is T/C . I know that the ABS is the anti-lock brake system but what does the other one mean. There does not seem to

Ad

...light and abs light staying on why does my t c light and abs brake lights come on and stay on several reasons, there is a problem with the ABS system, have it checked by a good repair shop, stay say ...

Ad

...control on most surfaces.directional stability, and optimum deceleration under severe braking conditions. On many systems, the abs light comes on if both brake lamps are blown. Have you checked

...ABS/TCS controller scanned for any stored trouble codes to see why the controller is turning on the light. The code(s) might help you to determine what part of the system is faulting. You'll have to ...

Question about 2005 Cobalt

1 Answer

...on while driving ABS and AC lights are separate issues. ABS is usually due to a dirty or bad wheel speed sensor. AC light has to do with the freon charge being low (r134a refrigerant pressure

Question about 2007 Cobalt Coupe

1 Answer

...ABS light stays on this is normal you have a brake problem or a sensor abs not working possible whl brn could do this as well so start at the brakes if you can check front and rear then check whl ...

Question about 2006 Cobalt

1 Answer

...you can try to reset the light by removing the positive cable on your battery for 10minutes,but if the light comes back on after that,you have a abs problem. please repost your problem to ...

...ABS light comes on because there has been a fault detected in the ABS system. The ETC uses the ABS system to function. Anytime the ABS light is on the ETC light will also be on. Your best bet is to ...

...brakes at high speed had breaks checked they are ok could in be the censoes or abs module If the ABS is faulty the ABS warning light should be on.Chances are the vibration is a warped rotor or

...abs light after installing new brakes You should not have to unless you somehow messed up a abs sensor or connection. A scan tool would reset it and see which sensor is triggering the light. Also ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...