Questions & Answers for: abs brake noises

...ABS system. and then a visual inspection of the brakes. Warped brake rotors do not make noice, but the steering will start to judder when brakes applied at around speeds from 40 up . Possible cause ...

abs fault light on and noise from abs my truck makes a noise which i know is the abs working and i have to hit my brakes alot of times eventually the noise stops a dinging bell sounds and the abs ...

brake fine only the abs light stays on? I have double checked that pads and they look fine. Did you bump the ABS pickup at the wheel hub when you changed the brakes? Or are the wires maybe nicked? The

...brake pads. the wise thing to do. Good Luck Thats the ABS working it pulses the brakes so as to not lock them up so you can still steer the car with the brakes applied. it does sound bad i hate ...

abs brakes chirping worn out brake pads and slightly warped rotors. Most brake pads have small steel tabs that touch the rotor at a 90 degree angle when it is time for replacement. if you keep driving

...brake booster and reinstalled brakes word fine wiyh no noise but noise came back in a min. or two This sounds like the abs system is coming on, this may be due to a bad wheel sensor, the best way to ...

...ABS Antilockbrake system is designed to stop brakes locking the wheels and skidding. if you get vibration under hard braking this is the unit working correctly. If it's your brakes making the noises ...

...abs light comes on and the brakes make loud noises when hitting the brakes and they are sometimes hard to push and it almost feeels like they are not going to work then they all a sudden go to the ...

...brake lines go into) i.e abs module=brain abs pump=muscle to put it simply. get the fault code(s), its going to be something like C0265 or C1214 basically "C" then 4 numbers. I can tell you EXACTLY ...

why does my abs light staying on for I just replace new brakes yesterday and it feels like brakes are stiking when you trune two the right it makes a loud noise ABS has nothing to do with the base ...