Questions & Answers for: Ford Explorer abs

Question about 1998 Explorer

1 Answer

abs light always on i have a 1998 explorer, the abs light went on and it seems the pump is burnt, can i pull the fuse so the abs light wont go on, im not worried about the abs working,i just want to ...

Ad

Question about 2003 Explorer

1 Answer

ABS light on The ABS light Is on and the ABS is engaged when applying brakes all the time. The brake pads are adequate and the rotors are fine. I also can't find a diagram for my fuse box. Sounds like

Ad

a light came on that said ABS... what does that mean??? what does ABS mean when the light comes on my dash board on my truck??? It indicates that something is bad with your ABS subsystem. First, did ...

Question about 2004 Explorer

1 Answer

ABS light stays on ABS light comes on wile driving ABS light comes on with ignition then should go off when you start the car. If abs sensor does not turn off after disconnecting the battery, then ...

where do I look to find the abs connection My ABS light is on where do I look to find the abs connection usually on the controller under the hood or why not just take the light out of the dash or find

Question about 2002 Explorer

1 Answer

ABS light came on. Put on all new breaks. ABS light continued to be on. Was tested 2 times at Auto Zone and I tested with my meter. There was no code found. Disconnected battery and it did not reset. ...

My 2005 Ford Explorer ABS entered a Ford Shop Dealer due to missing oil in the gearbox and a review to ABS System that was intermitenly lighting up. Ford shop checked some computer codes. Explorer ...

Question about 2002 Explorer

1 Answer

abs light on 2002 ford explorer xlt The ABS system means the Antilock Brake System. If the ABS lights on the dashboard permanently the ABS system is faulty. You must access the ABS Electronic Control ...

Question about 2004 Explorer

0 Answer

why is my abs light on Most likely an ABS brake sensor on either the front or rear brake calipers. This is a common failure. Tire store can check and replace. I don't recommend tinkering with this ...

Question about 2002 Explorer

2 Answers

abs ligt on clunking noise after replacing pads/rotors abs light on clunking noise Check all brake part's are seated correctly and all fitting bolt's are tight. As for A.B.S light plug in to test port

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

1998 Ford Explorer
1998 Ford Explorer

2,998 Questions

1996 Ford Explorer
1996 Ford Explorer

2,307 Questions

1999 Ford Explorer
1999 Ford Explorer

2,248 Questions

2002 Ford Explorer
2002 Ford Explorer

2,302 Questions

2004 Ford Explorer
2004 Ford Explorer

1,513 Questions

Manuals & User Guides

Loading...