Questions & Answers for: Nissan abs

Question about 2000 Maxima

TCS, SLIP and ABS lights on

TCS, SLIP and ABS lights on TCS, SLIP and ABS lights go on after starting the car and remain on. Check your brake fluid first. If that is low, top it off and recheck. If its ok, than you will need one

Question about 1997 Pathfinder

1 Answer

How to disconnent the ABS on a 1995 Nissan

How to disconnent the ABS on a 1995 Nissan Pathfinder If you need to disconnect the ABS because it is causing problems or for another reason like that you can either pull the fuse that controls the ...

Question about 2005 Maxima

2 Answers

I have a 2005 maxima with a bad ABS actuator.

i have a 2005 maxima with a bad ABS actuator. dealer wants $2500 to repair...can you just turn the abs system off? can I drive my 2005 maxima with a bad ABS actuator on my 1995 ford taurus i removed ...

Question about 1994 Maxima

2 Answers

Do the 94' nissan maxima have abs brakes

Do the 94' nissan maxima have abs brakes Do the 94' Nissan Maxima Gxe have Abs brakes on it... ABS was optional as an add-on for the GXE Model so I can't say whether you have them or not based on the ...

Question about 1994 Maxima

1 Answer

My abs light stays on

my abs light stays on The ABS light is on because you have a code stored in your ABS module. It is a good idea to bring it to a shop that has an ABS scanner to determine the problem. They can tell you

Question about 2004 Maxima

2 Answers

2004 Nissan Maxima ABS pump keeps running when

2004 Nissan Maxima ABS pump keeps running when ignition is off the module is bad. needs a new abs pump. to temporary remedy it find the pump and disconnect its plug. be careful as the abs now is not ...

Question about 1993 300ZX

1 Answer

300zx 1990 brakes work done

300zx 1990 brakes work done rotor pads, fuel check and abs light still on sensor was replaces , what else I can do to get that abs light off ? A component of your abs system is likely bad. It may be ...

Question about 2003 Primera

2 Answers

Clearing ABS light in Nissan primera

clearing ABS light in Nissan primera I have been told I need to clear the ABS code after replacing the Drive shaft and ABS sensor. How do I do this without without having to take it to a Nissan dealer

Question about 2012 Murano S 4dr SUV 3.5L V6 CVT Automatic

1 Answer

Disconnect abs light

disconnect abs light New battery installed wrong and car lost power. When battery got hooked back up ABS light came on. Dealer now states needs ABS Panel. Light was not on before car lost power. I ...

Question about 2004 Murano

1 Answer

ABS warning. code: "the ABS sensor right front wheel". After replacement of ABS sensor the function was OK. After 100 m the ABS warning lamp turned on again. New code: "malfunction in the ABS sensor.

ABS warning. code: "the ABS sensor right front wheel". After replacement of ABS sensor the function was OK. After 100 m the ABS warning lamp turned on again. New code: "malfunction in the ABS sensor. ...