Questions & Answers for: Intertherm 98 degrees

I DO NOT HAVE ENOUGH AIR FLOW FROM VENTS TEMP IS FINE 45 DEGREES ON 90 DEGREE DAY HOWEVER INSIDE TEMP NEVER SEEMS TO DROP UNIT RUNS CONSTANTLY TO REACH 81 DEGREES sounds like your filter is plugged or

intertherm heat pump: outside coils are frozen and it is 98 degrees outside. also, inside is not cooling. check your filter....if its ok you are prolly low on freon

furnace won't stay on my intertherm furnace has been working very well until just lately. I woke up one morning and the it was 61 degrees in my home but my thermestate was set for 68 degrees. I ...

Breaker tripping on electric furnace. I came home this morning and the system was blowing cold air... Thermostat set on 68 degrees... The breaker in the panel was tripped. It was around 16 degrees ...

The furnace is blowing warm air even if the thermostat low. The furnace will not shut off unless you trip the breaker to the off position. I had not used the furnace in several weeks until this past ...

NEED A LIMIT SWITCH FOR INTERTHERM 15 KW 140 DEGREE LIMIT 2 POLE take the switch and you can probally find a generic match on the Grainger web site. They have plenty to look at most limits have two ...

I have to keep reseting my hi limit, the burner section is very hot however my discharge temp get no higher than 95 degree and its taken all day to heat my home I fix it, and please do not email me ...

pressure og gas in compressor what is the presssure of gas in compressor Hi, this is a 4- ton unit you have. To understand freon pressure in a system, you have to be trained in temperature/pressure ...

I just got a new heating unit installed. However it runs constantly. If the target temp is 68 degrees it will hit 68 degrees and just keep running. It does the same at 63 degrees. Is this normal? Dear

where is the flame sensor on Intertherm MGHA-070abfc-01? There is no flame sensor per se, unless it has an ignition type pilot. Only temperature activated switches employed. The limit switch to the ...