Questions & Answers for: 96 olds cutlass supreme turn

cutlass supreme Both turn signals come on but will not blink - have replaced thermal flasher and all bulbs working properly and fuses are good. There are two flasher units,one for the turn signals,and

...Olds Cutlass Supreme S ?Both turn signals do not work.I've changed all bulbs, Checked, changed fuses.turn signals light, but do not blink. under the dash on the driver side there is a round or square ...

cutlass supreme You changed the hazard flasher or the turn signal flasher? It has two, one for the hazard and one for the turn signals make sure you replaced right flasher... by turning on turn signal

...96 Olds Cutlass Supreme, brake lights will not work. We've replaced bulbs, fuses and brake light switch and still nothing. Help! Try having someone push on brake pedal at the same time thay move the ...

...for the 96 olds cutlass supreme located you will find it under the dash on the drivers side it is a cylinder or square unit about 2" long with a connector plug on the top.....hope this ...

olds cutlass supreme both blinkers do not work. Emergency flashers do work. Looks like fuses are good There may be separate flashers for the Emergency 4 ways vs. the turn signals left or right. Try to

CUTLASS SUPREME (TURN SIGNALS) Front and Rear LEFT & RIGHT TURN SIGNAL ONLY, Will not flash. When using the turn signal switch the lite stays on, I have to use it manually. ** 4-Way flashers works

CUTLASS SUPREME (TURN SIGNALS) Front and Rear LEFT & RIGHT TURN SIGNAL ONLY, Will not flash. When using the turn signal switch the lite stays on, I have to use it manually. ** 4-Way flashers works

Cutlass Supreme Should be under the dash just to the left of the steering column, sometimes, if you have 2 flashers, you can turn on the emergency flashers and listen and feel for the click, your turn

...cutlass supreme turn signal flasher unit location, any photos to support the location. Flashers Print The turn signal flasher is mounted in a clip on the right side of the steering column support ...