Questions & Answers for: 93 toyota key 39 turn

Question about 1998 Camry

3 Answers

...toyota camry There is a pin that you have to push in on the bottom of the lock cylinder housing.It is recessed in a hole.You have to turn the key to acc or on to get it to push in.Once you push it in ...

Ad

Question about 1993 Tercel

1 Answer

...93 toyota tercel can you please give me details on how to do it You have to have the ignition lock exposed, take the covers off above and below the lock body that holds the cylinder. Insert the key ...

Ad

...key . i have a 93 dakota....had problems with the starter.... thought bad wire, check out the wireing......ac and blower didnt work, and the acc.....check the black box where the key turns on....it ...

...Toyota landcruiser Ignition key came out whilst in ACC position and will not go in again - so car is efectively stuck in the driveway us a screwdriver to turn to off position and put key back in ...

Question about 1989 Celica Liftback

1 Answer

...toyota celica to remove ign switch you must remove lower dash panel turn key to acc position and push ign lock at bottom of ign assem located about 1 inch down from front of key cylinder you will see ...

...toyota camry le key ignition is lock. I just got home at around 4 pm and after 2 hours. I turn the ignition on, but the ignition won't let me turn. I try turning the key hard to the ACC but it ...

...,, preferably from the original code ,, if that dont work its the ignition switch,,, a cut key just mechanical with no immobliser chip   should be cheap ''' cheaper than a garage ...

Question about 1993 Camry

1 Answer

93 toyota camry ignition lock up Car is a 93 Toyota Camry. Ignition will not turn over whatsoever. What should I be looking toward for troubleshooting this problem? What part would I need to get? try ...

...toyota prerunner How do I disable the automatic door locks? I saw one procedure that involved turning the key to on with the doors closed and dome light set to door then pressing and holding the ...

...93 Toyota Previa and messed up the ignition. How do I replace the ignition lock cylinder when I can't put a key in there and turn it to ACC? Hello there, Sorry for you friend,It is not nice ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...