Questions & Answers for: 86 nissan pickup fire

Nissan Pickup truck that has sat since 2000. I start it up and it dies almost suddenly. Any Ideas? it would be a good idea to do a turn-up first before you fire it up. Since it has being setting for 9

...Nissan 720 4X4 I just bought this truck. Some vaccum hoses are missing, some are brittle and cracked. I would like to replaced all vaccum hoses, I need a diagram of where the hoses connect. truck ...

86 HB Pickup 4x4 Z24 has no fire changed all parts still no fire parts replaced : computer, coils, distriber , ignition modules Try mass air flow sensor.

86 nissan 4x4 with a 2.4 with 8 wires I need the firing order . On the 4 cylinder engine the firing order is 1-2-3-4 from the fan. On the 6 cylinder engine the firing is 1-3-5 on the left from the fan

...86 nissan z24 For the 2.4L (Z24) SOHC: Firing Order: 1-3-4-2 Cylinders P__ u|.|.| Intake Side l |.|.|....1....2.....3....4......| l |.|.| Exhaust Side e y Distributor: .....1.....2 3................4 ...

...turn but wont start. the truck is an 86 nissan hardbody with a 3.0. i had to pull the heads and replace all the valves. the timing belt broke on me. make sure the timing is correct and the firing ...

...86 4WD Hardbody Z24 engine- It has 2 coils and 8 plugs even thogh its a 4 cyl. I think intake and exhaust plugs. One side is not firing. Changed coil and it didnt fix. How can I test and figure out ...

86 model Nissan truck. It was determined that the alternator was overcharging the battery and caused it to get hot to the point it caught fire. Check the alternator to see if it is overcharging. Sorry

...86 nissan truck and was fixing someones elses mess i found out that the firing order is right on the distributor cap it tells you a number and a letter E for exhaust and I for intake the intake side ...

...the fuel pump not producing enough pressure, Dont confuse this with the MAF sensor your injector is pulse width modulated. i need the fire order for a 86 nissan truck with the z24 motor with 8 ...