Questions & Answers for: 02 throttle position sensor

...If not idling correct, then the idle control valve or 02 sensor is faulty. If missfiring or popping during acceleration would indicate faulty throttle position sensor. yes it can be either of ...

...02/13/2003 Throttle Position (TP) Sensor ?5.0L Removal Disconnect the throttle position (TP) sensor electrical connector. Remove the TP sensor. Remove the two screws. Remove the TP sensor. ...

...throttle postitioning sensor A circuit Low input 1512- 02 Sensor Circuit High Voltage (Bank 2 Sensor 1) 1513- 02 Sensor Circuit Slow Response (Bank 2 Sensor 1) Here is the website i pulled them from. ...

what the sensors do they detect faults with temps,knocks,emissions, timing,crank position, fuel air mix,throttle position. so the 02 is detecting something and that something is what needs to be found

...Throttle pos sensor, But majority of cause is the 02 sensor shorting and drawing the 5v referance thats missing, Simply unplug the 02 sensors and drive veh, if no issue? replace 02 sensor before cat ...

...02/where-is-throttle-position-sensor.html -----------This will help.Thanks. It is located at the throttle body of the engine, that is where the air hose (from air cleaner) connects to the ...

...Throttle Position Sensor/Switch A Circuit Intermittent P0125 Insufficient Coolant Temperature for Closed Loop Fuel Control P0126 Insufficient Coolant Temperature for Stable Operation P0128 Coolant ...

i have a rough idle & it stalls at stops, otherwise runs fine, could it be the 02 sensor or throttle position sensor? it is either the throttle position sensor or the idle air control valve

...at high rpm idles perfect,quarter throttle and above,engine smothers down,won't rev up. could be maf sensor, throttle position sensor, 02 sensor, take it to auto zone they will read the codes for ...

...02 MDX has a problem staying running. On cold starts, it will just barely stay running, but when warmed up, it will not idle. Code P0221 TSP. If I replace this part, will this fix the problem? Error ...