Questions & Answers for: Delta 640 fine

Ad

Question about 23 684 6 Inch Bench Grinder Wheel, 60 Grit Fine

1 Answer

Grinder starts and runs then peters out and gets pretty warm. Is capaciter bad? Most probably. the motor will overamp, get hot and go out on internal overload.

Ad

Question about 23 684 6 Inch Bench Grinder Wheel, 60 Grit Fine

1 Answer

worked fire this am ripping 3/4 mahogany. Will not start this PM. Blows the circuit everytime. Tried another circuit...same thing. WTF? If it happens as soon as you turn it on, that sounds like a ...

Ad

Question about 16955-SSSD Stainless Steel Victorian Single Handle Kitchen 16955-SSSD

1 Answer

installed Delta 16955-SSSD Stainless Steel Victorian Single Handle Kitchen 16955-SSSD a couple months ago. About a couple weeks ago experienced low flow for about 4 hours then started working fine. ...

Question about 28 640 20" Single Phase Wood Cutting Band Saw

1 Answer

Where can I get a rip fence for a 20" band saw Where can I get a rip fence for a 20" band saw with a 24 1/2 x 241/2" table Try at eReplacementParts.com : Power Tool Parts and Tool Repair ...

Question about 28 640 20" Single Phase Wood Cutting Band Saw

1 Answer

what do i need to do to adjust the tension on my Delta 14" band saw IN THE TOP COVER THERE IS A ADJUSTMENT NUT,KNOB OR SCREW. TRICK IS NOT TO OVER TIGHTEN IT. WHEN CUTTING THE BLADE SHOULD NOT ...

Question about 28 640 20" Single Phase Wood Cutting Band Saw

1 Answer

The blade on my Delta Model 36-075 miter saw spins freely - motor works fine - i disassembled down to the gear drive - the gear appears to be fine no missing teeth or obvious damage. Does the inner ...

Question about 28 640 20" Single Phase Wood Cutting Band Saw

1 Answer

Rockwell/Delta 20" bandsaw. Locked Rockwell/Delta 20" bandsaw. Locked if placed in low position. Operates find in the high position. also where to get a operators manual 1960-1970. S/n 1616339 ...

Question about 28 640 20" Single Phase Wood Cutting Band Saw

1 Answer

delta table saw manual 640 owners manual Here is a link that should have it. Good luck http://www.manualsonline.com/support/delta

Question about 28 640 20" Single Phase Wood Cutting Band Saw

1 Answer

...640 Although I've had this saw for years, I really don't use it very often at all. Today, it was working fine for my first cut. When I raised the blade a little for my second cut, I heard a "clunk" ...

My Delta kitchen faucet, model470 or 471,single handle pullout signature faucet, is not spraying properly or allowing a good water flow. The first thing to check is the filter screen inside the nozzle

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Delta Grinder Experts

Marvin
Marvin

Level 3 Expert

85161 Answers

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

2009 Answers

ray gallant
ray gallant

Level 3 Expert

63865 Answers

Are you a Delta Grinder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...