Battery pack failure Wickes 18 volt battery pack, would not charge. Have investigated the cells and found what looks like a disintegrated resistor in the wire connectors, taped to the adjacent cell. ...
Question about TE 7-C 120V Rotary Hammer Drill
No power at all for te72 hilti. Changed fuse and plug and cleaned brushes. Any help please There should not be a fuse in the TE72. Do you have a continuity tester to test the switch, cord and stator? ...
Question about TE 7-C 120V Rotary Hammer Drill
where can i get my hilti 36v charger repaired my hilti 36v charger has stopped working Most chargers have a replaceable fuse. This may have blown.
Question about TE 7-C 120V Rotary Hammer Drill
...5A charger. Those were not serviced by Hilti. If they were bad then they just replaced the whole unit. If your charger has no power at all there is a fuse inside that you can replace. Other than the ...
my 36v cahrger is not charging ? 36v HILTI THERE IS A SMALL WHITE FUSE INSIDE THE CHARGER CHECK TO SEE IF IT HAS BLOWN IF SO REPLACE WITH A NEW ONE THE EXACT SAME AS THE ONE YOU ARE REPLACING BUT ...
PLUG IN BLOWES FUSE TE5 240 VOLT That means the appliance is faulty and needs to be repaired or thrown away if it is a cheap appliance.
Question about TE 7-C 120V Rotary Hammer Drill
I found a screw inside my hilti hammer and this cause a short circuit, I want to know if this hammer drill have a reset button or fuse inside All motors have a thermal cutoff built inside but if the ...
Usually answered in minutes!
110 Questions
46 Questions
38 Questions
15 Questions
16 Questions