...with no recess for the turn signals that will bolt on to the stock bike? I am gonna try the 200/55-18 this winter on a 18x 5.5"
need torqe spec for front wheel axle 1998 fxdwg dyna wide gliude Tighten the axle nut to 50-55 lbs. The slider cap nuts 5-11lbs
...1981 Wide Glide Bike was popping lightly thru the carb usually on light de-cel around 40 to 55 mph. Then started missing and backfiring thru both carb and loudly thru the exhaust. It misses ...
...intermittent check engine light (bike runs fine). The codes stored in the ecm are 44, 52, 54, and 55. The diagnostic tree check for code 44 shows TSSM bad. Diagnostic manual says to start with ...
Question about 2003 FXDWG Dyna Wide Glide
my 98 fuel injected ultra classic engine light came on. checked code 15 or 55 anyone else had this problem. bike runs fine just rebuilt motor but the check engine light stays on after start. fuel ...
Question about 2007 FXDWG Dyna Wide Glide
...fuel pump issues designed to keep "DRACHMA" to a minimum: 1. Normal fuel pump pressure is 55-62 PSI. 2. Check the white plastic convoluted tubing for age-related pinholes by removing and ...
harley torque specs rotor/front axle torq specs Hi Anonymous, front brake rotor 16 to 24 ft lbs. front axel 50 to 55 ft lbs.Good Luck
Question about 2000 FXDWG Dyna Wide Glide
...Angle Sensor (Within TSM/TSSM) Detects Possible Theft Attempt DTC 44 52 RAM Failure DTC 52, 53, 54, 55 53 ROM Failure DTC 52, 53, 54, 55 54 EEPROM Failure DTC 52, 53, 54, 55 55 Ignition Module ...
Usually answered in minutes!
230 Questions
114 Questions
107 Questions
104 Questions
30 Questions