Questions & Answers for: Jeep Grand Cherokee a 55

I got the code 55 when I turned the key 3 times. Can you tell me what that code means? Code 55 indicates end of codes. If you are retrieving codes, code 55 will indicated that you have reached the end

Eratic shifting of gears at speeds of 55 to 75 2002 Jeep Grand Cherokee Laredo 4x4 Eratic shifting of gears at speeds of 55 to 75 I would check the transmission fluid level and color, should be a nice

1995 4.0 4x4 jeep grand Cherokee Laredo blinking check engine code 38-55 Sorry I can't find a code 38 for '95 Jeeps in any of the data bases. 55 - End of codes

1995 jeep grnad cherokee codes 34 55 34 = speed control circuit. The solenoid for the speed control is not operating correctly, due to a defective solenoid or short in the wire connection. 55 = end of

12 51 55 codigo de error 12 just means the system was reset recently 55 mean end of codes so don't worry about them 2 however code 51 is an oxygen sensor error (O2 Sensor) a bad or shorted O2 sensor ...

Greetings - #12 & #55 appear where the odometer is after cycling the ignition key 3 times. Thanks for your time! code 12 is no vehicle speed it is normal because the jeep was not moving and code ...

1995jeep grand 4.0 code 12 -27-55 Code 12 = Battery was disconnectedwithin the last 50 key cyckes. Ignore this code, it is normal when the battery is disconnected. Code 55 = Completion of diagnostic ...

getting blink codes 12,11, 55 Will not start seems to be getting fuel and is turning but no spark even with new rotor cap, and coil. Getting codes 12, 11, and 55 Code 12 - BAttery disconnected ...

trouble codes 122355 I assume you mean 12 , 23 , & 55 right? If so the 12 means no ignition reference or battery has been disconnected.. (if vehicle not running during test this is OK) 23 mean ...

trouble code 55 When activated obd code will be listed by number and after all codes have been displayed code 55 will be displayed letting you know there are no more codes,