Questions & Answers for: 50 phillips

50 inch ambient light plasma washed out color all of a sudden and no dark colors. Whats happening? MY 2006 PHILLIPS AMBILIIGHT WONT POWER ON 50 INCH PLASMA

blurred image on my phillips 42" plasma my phillips plasma seems to have slightly blurred images,it happens most on faces and somtimes seems to have a red and green ora,is this a technical fault or is

Phillips 50 TV is about 6 months old. The HDMI inputs used to work fine. I had them connected to a Cable set top box (input 1) and Phillips DVD player (input 2). I have changed the cables, tried other

...is no pattern to this on the time side other than the slight buzz. cheers steve I have a 50 inch phillips plasma and the pixtals are taking over and color is dark the amblight is very

phillips 50p8341a trying to clean tube rays, how??? picture is foggy. Replace the coolant in the CRts thats a common problem with Phillips and magnavox rear projections. Heres a link to the coolant ...

...Phillips 50 PL9126D/37 remove the screws (12) holding the lower back on. loosen both silver screws on the left side of the lamp assy. pull out assy. using the small silver handle located on the assy. ...

...50" Phillips I have a 50" Phillips plasma tv. It will not turn on it only clicks over and over again. Sounds like there is a couple bad caps in the power supply. Check the power supply to see if ...

We replaced our lamp and housing with an Osram XL-5100 bulb and it is not working. The original was a phillips. Could the issue be that the replacement needs to be Phillips? you need to push the new ...

...50" Phillips I have a 50" Phillips DLP Model # 50PL9220D/37. When I turn the tv on it works fine for about 10 or 15 minutes and then it startes flashing and the colors are all messed up (ie most ...

I have a broken LG 50PT350 screen and I have Phillips 50PFP5332q screen is good. Can I change out the boards from Phillips with LG boards? wILL THE pHILLIPS BOARD INTERCHANGE? None of the boards are ...