Questions & Answers for: Chevrolet S 10 e 410 battery

Question about 2000 S-10

1 Answer

battery is dead while I was driving my s-10 all guages shut down and battery light came on. I replaced the battery but when Icranked it up the battery guage was still showing negetive charge. it is ...

Ad

when coming up with the 410 code and all the fuses are good does this mean mean that the pump probably needs to be replaced? Have a look at this link, may shed some light for you . ...

Ad

getting a code 410 and 440 on my codes. What should I look for? You should answer you r question by knowing what area the codes were in. Who pulled the codes and expected you to do something with a ...

Question about 1999 S-10 Pickup

1 Answer

will not charge battery altenator is good will not charge battery ,altenator is good ,battery is good fuze link is good Check the ground cable at both ends for a good tight and clean connection. also ...

98 Chevy S-10, battery disconneted and when reconnected car won't start. Think it is related to security system. Is there a reset for the security that would keep it from starting. Try this - ...

Question about 2000 S-10

1 Answer

2000 chevy s10 starter clicks The cause of that could be; 1. A low battery, check it to make sure that the battery does have 12 volts. There might be a draw on the battery or the alternator may have ...

...sensor code but I would have to look it up to see which one. 410 is a common one. Check the maxi fuse for the sec. air inj pump in the little fuse box tucked into the fender right beside the

Question about 1998 S-10 Pickup

2 Answers

truck dies hitting bumps. battery drained dead. But a jump start, it runs fine BATTERY HAS CELL PLATES SHORTING TOUCHING ON INSIDE BATTERY HAVE BATTERY CHECKED OUT. CHECK BATTERY CABLES MAKE SURE THEY

Question about 1998 S-10 Pickup

1 Answer

all electricpower down but, battery is fully charged main fuse? loose/faulty battery cable connection? Grip the black battery cable and move it from side to side. Do the same for the red. Neither ...

Question about 2001 S-10

1 Answer

ses light came on.....ran a scan tool and the code po410 came up. What are related components to code 410? This is a trouble code set for one of the emissions systems. It is called Secondary AIR ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...