Questions & Answers for: 3com switch default

default user/passwords : http://support.3com.com/infodeli/tools/switches/ss3/management/ug/setup.htm#13131 Regards, AstroMan you setup your network enabil.......... new setup conect port..... Try 3com

...switch 3com super stack 3 - 26 port for do configer The primary connection method for those switches would be serial connection. In the box there should have been a DB9 serial to RJ45 cable. ...

...3com switch 4500 Hi, I have not been able to find the command to routing two vlan on a 4500 switch. I thought it was like on cisco switchs "ip routing", but in 3com does not exist this command. i ...

...3com 4228g (3c17403) for use in the local school. The problem is that the switch has not been set back to the default settings. I connot log on with any use, I cannot set the ip address, etc... The ...

...am looking for 3com 4228g default ip address It depends what device on your local network it is It may be 192.168.1.1 or 192.168.100.1 You may have to do a network scan and locate its exact network ...

...3com? The default IP address of the device, depends on the status of the network where the device resides, but if the device is not connected to the network, or no DHCP server exists in the subnet ...

...3com superstack 3 switch 4500 model and the default username and password of the device Username:monitor Password: monitor---monitor mode, view only manager manager--can change all except security ...

3COM switch (RJ45 console port) 2. Open PUTTY or Xshell or HyperTerminal with a serial connection and the following settings (19200, 8, 1, N) If not connected may use 9600 or 115200 bps Starting......

...3com 4800G series switch through ethernet port , what is deafult ip . There isn't a default IP. You have to configure it via the console port first. ...