Question about OfficeConnect Wireless 11g 802.11g/b (3CRWE154G72)
3com and Netgear routers LAN setup is usually Gateway = 192.168.1.1 Subnet Mask = 255.255.255.0 IP Adress = 192.168.1.10(choose alternate number than 10 if allready used by another PC on your network,
...3com 3102 phone and a chameleon network appliance. this was pro installed about 2 years ago, but tech support is not coming back here. The phone has a MY IP address and an NCP ip address. They are ...
Question about OfficeConnect Wireless 11g Cable/DSL Gateway Router (3crwe754g72-a-uk)
3com officeconnect wireless 11g cable/dsl router i cannot configure my router. the ip address 192.168.1.1 and 192.168.2.1 is not working. i cannot open the gui. please help me.. Hi, router default ip ...
Question about OfficeConnect Wireless 11g Cable/DSL Gateway Router (3crwe754g72-a-uk)
...forwarding i have linksys ip camera and want to setup to access video using DDNS (ISP using DHCP); how do i configure port forwarding on 3com router? thanks\ franklin hh ...
would also add a stati route to your real default gateway for internet conectivity and such. cisco had routing vlan1 with diffrent network but 3com i try but not able to route any command for this ???
Question about SuperStack 3 NBX V5000 Call Processor Voice Mail Server
...3COM SuperStack 3 NBX 3C10202 I followed steps in the NBX Installation Guide by Changing the default IP settings of my computer. After that I tried to access the NBX NetSet utility, enter the ...
Question about OfficeConnect Wireless 11g Cable/DSL Gateway Router (3crwe754g72-a-uk)
appreciated. Alex 3com OfficeConnect Wireless 11g cable/DSL Gateway 3crwe554g72 you tried changing ip when the modem isn´t connected? can´t you turn the inbuild router off from modem setting
Question about OfficeConnect Wireless 11g Cable/DSL Gateway Router (3crwe754g72-a-uk)
...3COM 3CRWER300-73 Thanks to all. go to your browser, type your gateway ip and go to the router settings. In advance routing, there is a dropdown menu there where you can change the router setting to ...
...gateway and your IP Address. Write Default gateway down,Ie, 10.0.0.1, type exit into command prompt and press inter. Page will close. Next open your browser and type in the ip address to see if you ...
default gateway phone does not appear to use programmed default gateway Depending on the mode the phone is in, it may be only a layer 2 device - meaning it just broadcasts at layer 2 to find the NBX ...
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions