...Error Codes? What do these codes mean for a 1995 Ford Windstar LX 3.8L; PO171 Bank 1 Lean, PO174 Bank 2 Lean, PO402 EGR Flow, PO732 Incorrect Ratio 2nd, and PO733 Incorrect Ratio 3rd? Lights in dash: ...
...error codes P1131, P0171, P0174. Especially when going uphill, it slows down, misses and I have to park it on the shoulder and then start it again, very painful. I changed the oxygen sensor in the ...
...error code P0401 (in warmer weather) 2 mos ago & no problem noticed. Now Error P0404 in cooler weather and is surging, shaking at times, mis-shifting, sputtering, & often lacks full power ...
...error code Best explanation... http://www.obd-codes.com/p0401 REPLACE YOUR DPFE, FORDS BASIC PART NUMBER..9J460. ITS THE EGR PRESSURE SENSOR, VERY SUCCEPTIBLE TO MOISTURE IN THE EXHAUST..... IT IS ...
...Error Code P1131 And P1151 2002 Ford Windstar Error Code P1131 And P1151 those two codes are for the o2 sensors. both are the upstream sensors on the front and rear banks. so they are desinagted bank ...
Error Code P0240 on 2001 Ford Windstar Check engine light displayed, with code P0240. The catilytic convertor is at fault and needs replacing. Have it checked first for a 02 sensor can throw this code
...error codes popping up are the saying the Cam Shaft Position Sensor and the Mass Air Flow sensor need to be replaced. Are one of these causing this problem? Also, there is no check engine light on... ...
error code p0161 on ford windstar 2002 Hi there:This fault code refer at Oxygen O2 Sensor Circuit Low Voltage (Bank 2, Sensor 2), and basically means the PCM detected either an excessive current draw,
Usually answered in minutes!
1,830 Questions
1,838 Questions
1,503 Questions
1,212 Questions
1,032 Questions