Questions & Answers for: Lexmark error code replaced sensor

Question about Wheelwriter 1000 Typewriter

2 Answers

...error codes. Clean the sensor located on the printer ass'y (located behind the print wheel) with air. Also (power off) make sure the printer ass'y can slide freeley (L-R-L)and no obstructions have ...

Ad

Question about X342n All-In-One Laser Printer

3 Answers

...ERROR 200.13 ENTER ROD We got Code 200.13 and cleared out all of the stuck paper sheets we could find, but the printer kept showing code 200.13. At last we discovered there WAS in fact one more sheet ...

Ad

Question about Optra T620 Laser Printer

1 Answer

...error started after you installed it. Take the cartridge out of the printer and locate the encoder wheel on the right-hand side of the cartridge. The encoder wheel can be found on the right side of ...

Question about T630 Laser Printer

1 Answer

Error code 929 Dear Sir, Would you let me know this error code 929 meaning? Which parts need to replace with parts #? Thank you in advance. by tony Hi Tony you can refer to this links ...

Question about X5150 All-In-One InkJet Printer

1 Answer

...error code 50c the first error that appeared was 50c, replaced black ink cartridtge, next error code was 0502. we do not know what these error messages mean, we no longer have our manual. The encoder ...

Question about Wheelwriter 3 Typewriter

1 Answer

error code 215 should the weel be replaced ?? Remove the P/W check that area for debris, blow that area out. If that dosen't do it the printwheel sensor is probably bad. You'll need a tech. DickyO

Question about C782N COL LASERPR 25PPM 1200DPI 256MB ETH Printer

1 Answer

...code of 942.05 service yellow tmc sensor what does this me The error indicates either a defective yellow cartridge metering cycle or a sensor problem that usually requires service. But you can try ...

Question about T520 Laser Printer

1 Answer

...error code 929 service. Toner sensor Hello thanks for using Fixya A 929 Service Toner Sensor error indicates a problem with the toner sensor, the front harness cable, or the developer drive. It could ...

Question about C544dn Laser Printer

1 Answer

...code: 941.02 service magenta TMC sensor Please try the steps provided below. Step Action 1 Power off the printer/MFP and open the toner access door. Reseat all of the toner cartridges. Power on the ...

...error" on page 2-181. ----------------------------------------------- Google search result: https://printcopy.info/?l=en&mod=erc&brand=Lexmark&model=C935&code=925.00 ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment and Supply Experts

Cindy Wells

Level 3 Expert

6688 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

k24674

Level 3 Expert

8093 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...