Question about Spacemaker JVM1640SJ Microwave Oven
...error again. The manual doesn't seem to answer what F4 means. Does anyone know? I'm getting the feeling there is something wrong with my brand new microwave.... GE Microwave Fault Codes Failure Code ...
Error code F2 keeps beeping! Will not reset. Any Error code F2 keeps beeping! Will not reset. Any way I can fix this myself? thats the oven sensor , replace the sensor and your good to go
...asap. Once replaced, the error code will reset. This could be a loose connection between the control board and actual sensor. I would check the connections for proper fit before replacing the
...Code Interpretation Components To Check F-1 Communication error between touch pad and ERC (clock) Replace the touch pad or clock. F-2 Oven temperature sensed by electronic control Replace the ...
Question about Spacemaker JVM1640SJ Microwave Oven
error code -FS- on display with 3 long beeps While using the Fresh Vegetables Sensor Cooking feature, cooking stops after about a minute or two and the screen shows error code --FS-- with 3 long beeps
Question about JRS04 Electric Single Oven
...error code F3 and F5 F3 or F4 Open or shorted oven temperature sensor (RTD) Check sensor harness and harness connection between oven sensor and oven control. Replace oven temperature sensor (RTD) if ...
...error code F-4 after selecting any bake or broil function keys. Oven light works, fan for convection oven seems to be working. Makes no unusual noise. will display temp number for a while then beeps ...
error code F3 on my microwave Hi jlariz, The F3 error code on GE is about open or shorted oven temperature sensor (RTD. You have to check sensor harness and harness connection between oven sensor and ...
error code, wont stop beeping at us. Hi luvashley28, F3 error code means that there's an open or shorted oven temperature sensor (RTD). To resolve this you have to Check sensor harness and harness
...error code 1X4 (where X in the number of the burner) is similar to 1X3 which is "open temp sensor"; they are dealt with in the same way. Both can be due to damage but I would suspect that, unlike 1X3 ...
Usually answered in minutes!
3,405 Questions
567 Questions
285 Questions
308 Questions
257 Questions