Questions & Answers for: Dodge error code replaced sensor

accelerator pedal postion sensor 2 circuit performance? Error code P1281. Was diagnosed. Thank you An 02 neon does not have an APP sensor only a TPS at the throttlebody. Sounds like a bogus code to me

Error Code 406 EGR Positions Sensor I have a check engine light on my Caravan went to Autozone and they hooked up the reader and gave me the 406 EGR Position Sensor error. I've looked for a ...

...error code p0406 need to replace egr sensor, error code p0406 I have fixed the problem foe now. thank you What was the fix for the p0406 did you replace the EGR temperature sensor circuit high I ...

error code... 2005 Dodge Magnum 2.7 came up with 0038 error code. I took it to have it smogged and the result was a failed test and the details read HO2S Heater control circuit high (bank 1 sensor 2).

...error code P0135 ,this error code is related to O2 Sensor Heater Circuit Malfunction (Bank 1 Sensor 1).It would be a upsteam o2 sensor.The upstream one which is mounted on the exhaust manifold. The ...

error code po402 egr flow excessive error code po137 02 sensor circuit low volts (bank 1 sensor 2 replace the parts, but you must clear the codes after replacement.

...error code is: P2098 Generic, Post Catalyst Fuel Trim System too lean, bank 2 This would refer to the "down stream" sensor, which would be past the catalytic convertor. You may also have an exhaust ...

error code p0032 on 2004 dodge caravan. what is the code? Hi. P0032 means HO2S Heater Control Circuit High (Bank 1 Sensor 1). It means high impedance from O2 sensor, check wiring to sensor and replace

error code p0135replaced the 02 sensor and the next day error code p0406 change the egr valve and after a week error p0032 appears ask the the store for the 02 sensor warranty and check the wiring and

code U110B as an error. How can this be resolved? U codes are internal pcm failures. Need to rplace computer. Fault code U110B is for 'Lost Engine Coolant". Check coolant level and if this is all good