Questions & Answers for: 3-9x50

I just sent in product # 560519/Lab repair #2115426 just dont know who to ask? Blazer 3-9x50 Matte C/P it was shooting 2&half inches low at 25 yards.just wouldnt rise up? Dear Glajauin, No. It is not ...

i have a bushnell scope on my muzzle loader and it is hitting 3 inches low at a 100 yards. Which way do I adjust the elevation nob to bring the bullet up? the top knob should have up or U with an ...

double lines had my scope for 10 years no problems but last deer season the scope started havin doule lines on the vertical and horazontal the scope needs to be fixed by leupold or replaced.

while i look through the eyepiece and adjust the zoom from 3-9 absolutely nothing happens. Does this mean my rifle scope is defective? yes it is,,,sorry

i have a 3x9x50 prostaff scope i mounted it on a 7mm rem mag will the point of impact change with increase in magnification @100 yards. you must zero the scope on full mag =x9 at 100 yds first then it

The magnification adjustment dial on my Leupold Rifleman 3-9x40mm scope has become almost impossible to turn. Possible remedies? i would send it to leupold and have them check it out.

Turrets come right out - no click stops Check out their site here. Tasco warranty/repair. Hope this helps Fix Ya up.

What directions do you turn for the elevation and the windage Here is a diagram showing all the settings:

where can i get complete up & down adjustment wheel for a richter optik rifle scope 3=9x50 aoe please Direct from Richter or a dealer. And the up and down is called 'Elevation', and left to right ...

I lost the eyepiece from Simmoms 3-9X50 Blazer scope. How to locate one to replace it without buying whole scope and having to site in with deer season in full swing? contact SIMMONS directly or thru ...