Questions & Answers for: 37pf7320a/37 no power

...37PF7320A 37 in. HDTV-Ready LCD Does anyone out there in tech-world know the exact amperage for the two fuses in a Philips 37"LCD TV model 37PF7320A? The fuses are approximately 1 inch long with the ...

...37 When I power on the television, it blinks red once and then four times. There is not a picture showing. It is the low voltage power supply. I just had my set repaired and it had the same symptoms. ...

37PF7320A 37 in.... Problem no picture in tv and avmode Dear sir my philipe tv have sound but no have picture in tv and av mode it have backlight but no have picture on screen so i need some help from

37PF7320A/37 comes on the turns off after 30 minutes After 30 minutes goes off then unplug tv ,plug back in it turns on? have sound, picture everything but one thing i felt the fuses on power supply ...

...37PF7320A/37 Doent stay powered on...red lite blinks three times, pauses, then repeats itself My philips 37 inch LCD (roughly two years old) TV will not stay powered on. When powered up, the TV dies ...

...37PF7320A. TV currently will not power on. Green light quickly turns to red flashing = 1 long, two short. Any thoughts on the problem? Fuses? Thanks for your help. hi!you can get the manual at ...

...37PF7320A/37 and last night I turned it off and there was a red light blinking where the green power light is. It blinks once, then nothing then 4 quick blinks. The T.V. wont stay on now and I don't ...

...37PF7320A 37 won't turn on. When I press the power button the indicator light blinks 1 long red then 4 short. I tried to change both of the fuses but I couldn't find the ceramic 5M so I substituted ...

...37PF7320A/37, and when I turn it on, the light on the front comes on, but I have no picture or sound. In the back of the TV, near where the plug goes in, I hear a clicking every 10 to 15 seconds, as ...

...37pf7320a/37 blinking 1 long 4 short red. what could it be the issue? Need to check the electrolytic caps on the main power supply,for bad or bulged caps, and replace them , or just replace the power ...