Questions & Answers for: Jeep 35 80 Office Equipment & Supplies

Ad

Question about 2004 Grand Cherokee

1 Answer

...80% that you have a bad hub bearing on the drivers side. To get to it, you must remove the brake assembly and axle retaining nut (do nut first with vehicle on ground, tire on) If wheel has removable ...

Ad

...80°F) (90°F) (100°F) (110°F) Air Temperature -3 to 3°C 1 to 7°C 3 to 9°C 6 to 13°C 10 to 18°C at Center Panel Outlet (27-38°F) (33-44°F) ...

Ad

Question about 1998 Cherokee

1 Answer

...35 mph to 80 i have a 96 a JGC zj at 35mph all the way up to 80-90 mph it has a slight studder almost like its misfiring i replaced plgs wires cap rotor iac sensor the codes its showing are injector ...

...a 98 4.0 jeep on rods and mains. Tighten all main bearing bolts to 108 Nm (80 ft. lbs.) torque. Install the main bearing cap brace. Tighten nuts to 47 Nm (35 ft. lbs.) . Connecting Rod Nuts 33 ...

Question about 1993 Wrangler

1 Answer

...35 to ship both back.. 40 days later still nothing.. after contacting everyone from ebay paypal and credit cards I was finally able to get some more information from the guy and contacted the local ...

Question about 1995 Grand Cherokee

1 Answer

...80's models if you don't have air conditioning) 34 (1984-86) EGR solenoid circuit shorted or open OR 34 (1987-1991) speed control shorted or open 35 Cooling fan relay circuit open or shorted ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...