Questions & Answers for: Harley Davidson FXST Softail Standard 35 80

have an 80 evo motor only running on one cylinder. when riding, the motor shut off like i had shut the key off. i hound that the battery was bad but, after replacing the battery the motor is only ...

Hi I am wanting to know the Torque Settings for outer primary case for a Harley Davidson 2008 FXST Softtail Thank you primary cover torque settings 80-110 INCH pounds.

what are the standard wheel sizes of a 2009 FXST Harley did not make a FXST in 2009 so I am assuming you need the tire and rim sizes for the 2003. The tire sizes are front 80/90-19 or a MH90-21 ...

What are the largest tires (width) that I can put on my 03 FXST (both rear and front) without doing any modifications. Thanks! Hi. Standard tires are already oversized in 03 model. This are the ...

I have a 1999 fxstc. the speedometer stopped working. Also the turn signals work but have to be turned off manually. The engine is an 80 cubic inch. On the Softail speedometer there is a reed switch ...

where do i hook the 3 wires out of the 80 ci motor to the wire plus module. red and white black and white and green and white May I sugust harleytalking.com they may have a diagram.. they have helped ...

wire diagram for 80 harley motor to wire plus module harness I dont have one, but harleytalking.com has helped me ,,, good luck..';';

...torque specs Front engine mounting bolts 70-80 ft-lbs Transmission mounting bolts 30-35 ft-lbs criss-cross pattern Top engine mount bolt 45-50 ft-lbs Engine/transmission bracket bolts 30-35 ...

80 Historic 25 Rear ignition coilopen/low 81 Historic 24 Front ignition coilhigh/shorted 82 Historic 25 Rear ignition coilhigh/shorted 83 Historic 24 Front cylinder combustion intermittent 84 Historic

rear strut torque specs 2003 fxst High Anonymous, 5/16" fasteners 20 ft lbs. 3/8" fasteners 35 ft lbs. Good luck