Questions & Answers for: Ridgid 300

Threads are all chewed up and broken in places Rigid 300 pipe threader is breaking and chewing the threads up First look carefully at your die, is one of the cutters out of place? I hope you have been

my ridgid 300 as developed a problem its making a loud screeching noise when threading, when in reverse its struggling not all the time, but its getting worse can any one help while threading pipe , ...

Pipe threader cuts 1 1/4 pipe thread fine but when we go to a 2" pipe the threads cut rough where they don't function, same dies same collar same mach. 1" to 2" dies just changed.Threader is over 20 ...

...look for used that will do what I want? (I see a Ridgid BS1400 almost new on Craigslist for about $300 with .75 HP, but one review I saw said it wouldn't handle 4" thick hardwood very well). Any ...

I have an older Ridgid 300, model # is 300-T2 with sn# of ed44303c98, were do I find a parts breakdown Thanks Brian Hi, parts can be found on amazon, click here Amazon com ridgid 300 parts and take a ...

ridgid 300 pipe cutter owners manual owners manual Hi,Could this be the manual?http://www.jms-planthire.co.uk/media/pdf/1215_300_Compact-1233-300_535.pdfKen.

How do you adjust a victaulic roll groover There are several adjustments that can be made on this tool, therefore it would be best to discuss your question over the phone with one of Victaulic's Tool ...

My Ridgid 300 threader no longer cuts exact threads at the 1/2 inch setting. I have to cut undersize to make them fit I assume you've tried replacing the threading dies. You probably need to repair ...

Machine keeps tripping breaker when I plug it in or while threading. take it in for repair as you have an insulation leak or short in the switch or motor if the breaker has an earth leakage system , ...

...look ok no distortion tried 2 other motors from other good working machines same problem Ridgid 300 pipe threading machine, not running smoothly like it should Not sure what your question is here ...