...shifter lock button? if not Shifter Lock is malfunctioning. It must be taken apart to diagnose what it is exactly. If you CAN push Button then it could be the shift cable itself is frozen, and needs ...
...button. Nest to the shifter there is a round cover, about dime size. Take a small flat screwdriver and carefully pop that out. Under that cover is a button, you push it and it should release the ...
...bit of work first get bulb from dealer then remove cover and shifter handle make sure not to loose any springs remove screws holding shifter cover on lift up and light bulb socket is accessible
...shifter handle. IF yes you have a shifter malfunction replace shifter assembly. IF no, inspect shift interlock solenoid and or relace solenoid and cable. You should see a small access cover about the ...
Question about 1998 Frontier
handle so i cant smog it the scan indicated a ****** problem thanks Most of that message did not make any sense.Are you talking about the overdrive button on the shifter ? The check engine light
...shifter for a release button that will allow you to move the vehicle out of park so it can be taken to a repair shop. It is usually hidden under a small flap or cover that will have to be lifted with ...
Question about 1988 Pathfinder
...will start but the shifter is stuck in park There should be a button next to the shifter to release it in an emergency. The problem could be the brake light switch or the solenoid on the
...the shifter handle or the entire assembly. You may want to call the nearest nissan dealership and have them run your vin number. Some Versa's have a recall that will replace that for you for
...for shifter handle after pushing down small chrome cover on bottom of handle. Remove shifter cover (screws or clips hold it in place) to gain access to blub. 1/8 turn to left on socket and it is ...
Question about 1998 Frontier
...shifter handle has a lot of slop any way to tighten it up? The shift handle has a plastic bushing and metallic locks that holds it firmly and allow you shift the gears smoothly, so when this bushing ...
Usually answered in minutes!
1,587 Questions
1,450 Questions
1,309 Questions
1,122 Questions
1,306 Questions