Questions & Answers for: Suzuki Grand Vitara lever switch

Question about 2001 Grand Vitara

1 Answer

switch for?. The engine is a2.0 turbo intercooler. This is a electric heat boost for demisting in winter months, turn fan on to full, heater lever to full and air controll to full. Be warned uses lots

Ad

Question about 1999 Grand Vitara

1 Answer

...a 1999 suzuki grand vitara and on mitchell it tells me i need to remove the center consoles, shift levers & boots, and the breather hose from the rear of the cylinder head I have done this work and ...

Ad

...switch at side of shifting lever. Is there a fuse that controls this function. Where is it and is there anything special about replacing it. I would check the stop/ horn fuse, also check see if your ...

...switch? Remove access hole cover by unfastening screw. Turn ignition key to "ACC" position and move shift lock solenoid rod (or manual release plate) toward rear side of vehicle by using screw driver ...

Question about 1999 Grand Vitara

1 Answer

...work, but not the headlights. I have checked and replaced all the fuses even though nothing was blown. what else could be the cause??? Dimmer switch is bad (lever used to flip between HI's/LO's

Question about 2007 Grand Vitara 4WD

1 Answer

...switch while stopped. Put the shift lever in neutral and step on the brake with the front wheels pointed straight forward. Now switch from 4H lock to 4H. If no immediate response, turn the steering ...

lever, that is the PRN switch if the switch lies and shows not Park the starter will be dead by DESIGN. you can hot wire any starter solenoid and see if the starter works at any time. if it does , the

Question about 2007 Grand Vitara 4WD

1 Answer

...lever area. (bottom screws) 4: remove tamper screws from lock switch clamp. (grinder) 5: remove lock, some require steering wheel removal. if you remove the wheel, most DIY will destroy the main ...

whole deal. a volt meter at the switch, teminal to ground read black-org wire 12v ,not 4wd. 0v , engage 4wd, (move the lever key on, and see it toggle. 0v, 12v, 0v ,12v, the sure sign of a good switch

Question about 2001 Grand Vitara

3 Answers

lever switch. I looked up a image of the turn signal switch assembly. The levers appear to be directly attached to the switch. As a new switch assembly is ridiculously expensive I'd try trying to take

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...