Questions & Answers for: honda accord drive belt pulley

...Honda accord has started to whine on acceleration. At first I thought there was something wrong with my automatic transmission, but a friend pointed out that the whining goes away when I shut the a/c ...

...honda accord automatic hi on your year it should be changed every90,000 mils i would advise changing the water pump at the same time please rate this answer thanks Every 90K miles it needs to be ...

...Honda Accord? First, note how the drive belt is routed, then use a wrench on the tensioner pulley center bolt and turn the tensioner clockwise (four cylinder engine) or counterclockwise (six cylinder ...

honda accord? and about how much should it cost? Technically, nothing else needs to be changed when replacing a timing belt, however it is recommended or suggested to replace the timing belt tensioner

...drive 2004honda accord without the a/c compressor? I am assuming that the a/c compressor was removed? Yes, you can drive any vehicle without the a/c compressor. If the engine has one serpentine belt, ...

Honda Accord LX.The a/c belt is smoking due to the frozen a/c clutch, can i just cut the belt off or does the belt operate my power sreering also? if you look at the belt to see if it drives any other

...honda accord V6. When I put back in the third new serpentine belt on the pulley of the power steering pulley,the belt can not get to the groove, It is blocked by the engine block. The power steering ...

...Honda Accord. I hear a squealing noise after driving a few miles. It is a constant sound coming from the belt area. I changed the belt and tensioner. The noise is still there. Please help me. replace ...

...Honda Accord Depends on what you call easy and if you are mechanically inclined. First jack up the vehicle, remove the tire, remove the inner fender cover to accessthe balancer pulley. remove the ...

...accord honda, If in fact they are doing it sometimes, but not all the time, this is indicating worn out belts, and they need replacement. Belts can look good, but can slip and squeal when they get ...